Gear Shifter
High is the primary driving gear for your TOMCAR®.
Low is intended for use where maximum torque is required.
To change gears, stop the vehicle and move the lever to the
desired position. If the gear shifter is stuck, choose a driving
direction and press the throttle pedal lightly while moving the
lever out of gear. Stop the motor and engage desired gear.
Maintaining proper shift linkage adjustment is important for
the shifter function. See your supplier if you experience any
shifting problems.
CAUTION
Do not attempt to shift gears while the vehicle is moving or
damage to the transmission could result.
Make sure the lever is in the proper position and the gear is fully engaged.
WARNING
When parking the vehicle, always switch OFF the ignition and remove the key. Engage the parking brake and shift the
transmission to Neutral to avoid vehicle movement by accidently pressing the throttle.
To Next Page
Loading...