Direction Selection
Driving direction must be selected after the vehicle is powered on. Pull the switch lever and lift up for Forward
direction or down for reverse direction.
Direction cannot be reversed during driving. In case the direction is reversed while driving, the motor will increase
regenerative braking till the vehicle comes to a complete stop. Only then the system will allow for a change of
direction.
Vehicle Shutdown
1. Release the throttle pedal completely.
2. Brake to a complete stop.
3. Change direction selection switch to the Neutral (center) position.
4. Shift vehicle’s transmission to Neutral.
5. Engage the parking brake.
6. Turn the ignition switch to the “OFF” position.
To Next Page
Loading...