4 Point Harness
Inspect all the harnesses for proper operation before each use of the vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click
indicates that it is securely latched.
2. Push the red button in the middle of the buckle to make sure it releases freely.
3. Check the belt webbing for wear, cuts or damage. If any irregularities are found, have the seat belt system
checked and/or replaced by a TOMCAR® supplier.
4. Check that the harness is attached firmly to the hooks on the frame (four locations).
The TOMCAR® 4-point harness is adjustable and should be adjusted for all occupants before driving. Make sure the 4-
point harness is adjusted before riding.
WARNING
Failure to follow the age recommendations for this vehicle could result in serious injury or death. No one under the
age of 16 may operate this vehicle or ride as a passenger in this vehicle.
To Next Page
Loading...