Installation for using a charger
Have a qualified professional check that each outlet you intend to use with the charger complies with the standards
and regulations in your country, especially proper overvoltage protection fuse.
you are recommended to check regularly the domestic power supply as well as the charger wall socket.
Charging Precautions
1. Do not perform any operations on the vehicle during charging (washing, maintenance etc.).
2. In the event of the presence of water, signs of corrosion or foreign bodies in the charging cord or socket, do
not charge the vehicle.
3. Do not attempt to touch the cord contacts.
4. Avoid charging your vehicle in extreme temperatures (hot or cold).
At temperatures below -5
O
C or above 55
O
C the battery cannot be charged.
Charging
1. Switch the ignition off.
2. Make sure the manual battery disconnect switch is in the ON position.
3. Connect the charger to the wall socket.
4. Remove charge connector cover and connect the charger to the vehicle.
5. Charge time varies depending on SOC, charger type and ambient temperature.
6. You do not need to wait until your traction battery SOC is low to recharge your vehicle.
7. When the charger is complete, disconnect the charger from the wall socket, unplug the charger from the
vehicle and close the vehicle’s charge socket cover.
To Next Page
Loading...