Shock and Air Compensators Pressure Adjustment
Do not use an air compressor that has a maximum air pressure capacity above 200 psi.
To fill the shock air chamber or air compensators, raise the wheel off the ground. Remove the valve cap from the
shock air valve. Attach the air chuck to the shock air valve and hold in place for five seconds. Reinstall the valve cap.
Important: Due to the size of the air chamber in the shock, the volume of air is small. Do not try to check the air
pressure with a pressure gauge. Attempting to check the shock air pressure will release a significant amount of air,
resulting in poor shock performance and possible shock damage.
To Next Page
Loading...