5. Tap NO to keep the fixed speed camera alerts.
6. Enter the time in seconds for when a warning is given before you
reach a camera. Then tap Next.
7. Tap the sound you want to be used for the warning.
Tips: To switch off warning sounds for a camera type, tap Silence in
step 7 above. You still see a warning in the Driving View if you switch
off the warning sound.
8. Tap Done to save your changes.
Speed camera symbols
Speed cameras are shown as symbols on the Driving View.
When you approach an area where an alert is located, you see a symbol and a warning sound is
played.
You can change both the warning sound and the number of seconds that the warning is issued before
reaching the alert.
To Next Page
Loading...
Need help?
General
