Intermediate warning - type 3
Once in the speed check zone, if you are driving faster than the permitted
speed and have not received a start of zone warning, you see a visual
warning in the Driving View indicating the maximum permitted speed. You
also hear a loud audible warning.
These warnings occur at the FIRST intermediate point only and are there
to remind you to slow down...
End of zone warning
As you approach the end of an average speed check zone, you see a visual
warning in the Driving View with a distance to the camera shown under-
neath it. You hear an audible warning.
You also see a small icon on the road showing the position of the average
speed check camera at the end of the zone.
Speed Cameras menu
To open the Speed Cameras menu, tap Services in the Main Menu and then tap Speed Cameras.
Tap this button to report a new speed camera location.
Tap this button to set the alerts you will receive and the sounds used for
each alert.
Tap this button to disable alerts.
Tap this button to enable the report button. The report button is shown in
the Driving View or in the quick menu.
When the report button is shown in the Driving View, this button changes
to Disable report button.
To Next Page
Loading...
Need help?
General
