TomTom GO 510 User Manual

43
•
•
•
•
•
•
Chapter 14
Hands-Free Calling
Hands-Free Calling
If you have a cell phone with Bluetooth®, you can use your TomTom GO to
make phone calls and send and receive messages while you are driving.
Connecting to Your Phone
First you must establish a connection between your cell phone and your
TomTom GO. You only have to do this once. Your TomTom GO remembers
your phone.
Tap cell phone in the Main Menu, then follow the instructions on the screen.
Setting up TomTom PLUS
After you have established a connection with your phone, you can set up a
connection for TomTom PLUS services.
For information about TomTom PLUS, see TomTom PLUS on page 63.
Your Phone Book
You can copy your phonebook from your mobile phone to your TomTom GO
so that you can make calls with just a few taps on the screen.
Note: Not all phones are supported. For more information, visit
www.tomtom.com/phones
Tips
• Make sure that you switch on Bluetooth on your phone.
• Make sure that your phone is set to "discoverable" or "visible to all".
• You may have to enter the password ‘0000’ on your phone in order to
connect to your TomTom GO.
• Make your TomTom GO a trusted device on your phone. Otherwise you
will have to enter ‘0000’ every time.
See your phone’s user guide for information about Bluetooth settings.

TomTom GO 510 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Display resolution	480 x 272 pixels
Display number of colors	65536 colors
Display size (HxV) (imperial)	4.0 \
Processor frequency	400 MHz
Battery life (max)	4 h
Product color	Gray

Weight and Dimensions

Depth	81 mm
Width	112 mm
Height	66 mm
Weight	300 g