TomTom GO Camper User Manual

11
Installing in your car
Use the supplied mount to install your TomTom GO Camper in your vehicle. Read the instructions
about positioning your device
before you install your TomTom GO Camper.
To install your TomTom GO Camper, do the following:
1. Connect the supplied USB cable to the mount. If the mount is integrated into your TomTom GO
Camper, connect the USB cable to the device.
Note: Use ONLY the USB cable supplied with your TomTom GO Camper. Other USB cables may
not work.
2. Connect the USB cable to the USB car charger and plug this into the power supply on your
dashboard.
3. Choose the best smooth location, on your windscreen or side window, to mount your TomTom
GO Camper.
Tip: If the mount is integrated into your TomTom GO Camper, you can easily change the
rotation of your device. Push the button on the back of the device to release the mount, then
slide the mount out. Insert it back into the other side of the device.
4. Make sure that both the suction cup on the mount and your windscreen are clean and dry.
5. Press the suction cup of the mount firmly against your windscreen.
6. Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
7. If your mount is not integrated into your TomTom GO Camper, place your TomTom GO Camper
in the mount, making sure that it clicks into place.
Dashboard adhesive disks are available as part of a range of accessories for your TomTom GO
Camper. For more information, go to tomtom.com/accessories
.
Positioning the device
Be careful where you install your TomTom GO Camper. The TomTom GO Camper shouldn't block or
interfere with any of the following:
 Your view of the road.
 The controls in your vehicle.
 Your rear-view mirrors.
 The airbags.
You should be able to reach your TomTom GO Camper easily without leaning or stretching. In a car,
you can attach your TomTom GO Camper to the windscreen or side window or you can use a
Dashboard Mount Disk to attach the mount to your dashboard.
Switching on and off
Switching your device on
Press the On/Off button until your device starts. If the device was off you see the map view. If your
device was sleeping you see the last screen you were looking at.
Get going

TomTom GO Camper Specifications

General

Bluetooth	Yes
Dimensions	162.9 x 105.60 x 18.60
Packaging content	GO Camper, //webassets.tomtom.com/otf/images/media/43B91E88-F5D5-41E8-AB9F956B968119E0 Magnetic mount, //webassets.tomtom.com/otf/images/media/238D1C56-FBA7-425D-846C2B149BA212EC Car Charger, //webassets.tomtom.com/otf/images/media/A0C9011A-E21E-43C1-B2B52EED09140AD7 USB Cable, //webassets.tomtom.com/otf/images/media/45291E16-F7DE-4C31-98633E35B6D79EA7 Adhesive Disk, Mount your GPS on your dashboard., //webassets.tomtom.com/otf/images/media/B9736558-E35E-4EE7-86383D4EF917FB71 User Manual, //webassets.tomtom.com/otf/images/media/44515AFB-61EA-4C1A-B7E75B164F12A745
Display resolution	800 x 480 pixels
Display diagonal	6 \
Cables included	USB
Marine (chartplotters, sounders)	No
Languages support	Multi
Traffic Message Channel (TMC)	-
Map coverage	World
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Storage media type	Flash
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Internal storage capacity	16 GB
Form factor	Fixed
Product color	Black
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Power source type	Battery, Cigar lighter
Battery life (max)	1 h
Micro-USB 2.0 ports quantity	1

Weight and Dimensions

Depth	18.6 mm
Width	162.9 mm
Height	105.6 mm
Weight	262 g