Malfunction Sloving Guideline
Malfunction Cause Treatment
No response on the drone
1. The drone enters low voltage
protection mode
2. The remote controller’s battery
is low and the power indicator
will flash.
3. The frequencies of remote
controller and the drone are
not matched
Response of control is not
sensitive during flight
1. The remote controller’s battery
is low or poor battery quality
2. There are remote controllers
with the same frequency is
transmitting interference.
Deflecting while hovering
1. No horizontal calibration
1. Charge the drone
2. Change the remote controller’s
battery
3. Re-match the frequencies of the
remote controller and the drone.
1. Replace the battery with better
quality
2. Change to a place that does not
have devices with the same
frequency to transmit interference.
1. Do horizontal calibration again
There are two remote control modes of this product, mode 1 and mode 2. Mode 1 is the default setting.
10
To Next Page
