Tool-Temp TT-188 - Technical Specifications

Manual of instructions TT-188 12/37
3. Technical Specifications
Temperature range
up to 90°C with water / up to 150°C with oil
Temperature control
self-optimizing, electronic microprocessor controller MP-888
Heating capacity
Water operation: 9 kW, with manual stage switching 3/6
Oil operation: 3 kW
Pump capacity
motor 0,75 kW
Pressure mode: max. 4,5 bar / max. 75 l/min
Vacuum mode: vacuum max. 8mH
2
O
Cooling capacity
approx. 35 kW at 90°C
Filling amount
approx. 6 litres
Connections
to mould
½“ BSP female thread
from mould
½“ BSP female thread
cooling water inlet with water filter
⅜“ BSP female thread
cooling water outlet
⅜“ BSP male thread
Dimensions (L×W×H)
670 × 260 × 650 mm
Weight
approx. 55 kg empty
Category of protection
IP-44
Electric
In separate switch cabinet, easily accessible from the front
Colour
silver-grey RAL 7001
Heat exchanger
low-maintenance
Noise level(dBA)
< 70 dBA (distance 3 m)