Tool-Temp TT-390 - Technical Specifications

Manual of instructions TT-390 12/35
3. Technical Specifications
TT-390 / 16 kW
TT-390 / 24 kW
Temperature range
Up to 360°C with heat transfer oil TOOL-THERM SH-3
Temperature control
self-optimizing, electronic microprocessor controller MP-888
Heating capacity
with stage switching 8/8
with stage switching 8/16
Pump capacity
motor 1,8 kW
max. 5.5 bar / max. 100 l/min
Cooling capacity
approx. 90 kW at 360°C circulating temperature
Filling amount
15 litres
21 litres
Expansion volume
16 litres
16 litres
Connections
to mould
¾“ BSP female thread
from mould
¾“ BSP female thread
cooling water inlet with water filter
1“ BSP female thread
cooling water outlet
1“ BSP female thread
Overflow
½“ BSP female thread
Dimensions (L×W×H)
1240 × 480 × 1400 mm, incl. castors
Weight
approx. 205 kg empty
approx. 215 kg empty
Category of protection
IP-44
Electric
In separate switch cabinet, easily accessible from the front
Colour
silver-grey RAL 7001
Heat exchanger
low-maintenance
Noise level (dB)
< 70 dB (distance 3 m)