Tool-Temp TT-390 User Manual

Manual of instructions TT-390 2/35
General information
This documentation is copyrighted. Unauthorised duplication is prohibited by law. To the best of our
knowledge and belief, the information contained in this documentation is true and correct as of the
date of publication. The contents, however, do not constitute a binding obligation on the part of
TOOL-TEMP AG and are subject to change without notice.
In case of inconsistencies in the English translation, the German version shall prevail.
© Copyright 2017 TOOL-TEMP AG
Contents
1. General Safety Information ........................................................................................................... 4
1.1. Safety Symbols .................................................................................................................................................................. 4
1.2. Range of Application .......................................................................................................................................................... 4
1.3. Intended Use ..................................................................................................................................................................... 4
1.4. Safety Information .............................................................................................................................................................. 5
1.4.1. General Information .................................................................................................................................................. 5
1.4.2. Process Monitoring ................................................................................................................................................... 5
1.4.3. Information for Operators and Personnel .................................................................................................................. 5
1.4.4. Changing the Parameterisation ................................................................................................................................ 6
1.4.5. Residual risks ........................................................................................................................................................... 6
1.5. Using this Documentation .................................................................................................................................................. 7
1.5.1. Additional Documentation ......................................................................................................................................... 7
2. Overview temperature control unit .............................................................................................. 8
2.1. Front view .......................................................................................................................................................................... 8
2.2. Rear view......................................................................................................................................................................... 10
2.3. Identification of residual risk on the unit ........................................................................................................................... 11
3. Technical Specifications ............................................................................................................. 12
4. EC – Declaration of conformity .................................................................................................. 13
5. Installation .................................................................................................................................... 14
5.1. Installing and dimensions of the temperature control unit ................................................................................................. 14
5.2. Connections ..................................................................................................................................................................... 15
5.3. Power supply ................................................................................................................................................................... 16
5.4. Initial operation ................................................................................................................................................................ 17
5.4.1. Heat transfer oil ...................................................................................................................................................... 18
5.4.1. Pump rotation check ............................................................................................................................................... 18
5.4.2. Display of pump pressure ....................................................................................................................................... 18
6. Operations .................................................................................................................................... 19
6.1. Overview MP-888 ............................................................................................................................................................ 19
6.2. Parameter settings MP-888 ............................................................................................................................................. 21
6.3. Setting of the temperature – Heating / Cooling ................................................................................................................. 23
6.4. Adjustment of electronic flow control ................................................................................................................................ 23
6.5. Temperature measurement INTERNAL (IN) – EXTERNAL (OUT) ................................................................................... 23
6.6. Mould drainage – Changing the consumer ....................................................................................................................... 24
6.7. Leak prevention operation................................................................................................................................................ 24
7. Safety and monitoring devices ................................................................................................... 25
7.1. Pump ............................................................................................................................................................................... 25

Tool-Temp TT-390 Specifications

General

Brand	Tool-Temp
Model	TT-390
Category	Control Unit
Language	English