Tool-Temp TT-180 - User Manual

Manual
BA 1152e
EL 1634 d/e/f/it
07/2007
B-0670
Temperature control unit
TT-180
TOOL-TEMP AG Tel.: +41 (0)71 644 77 77
Industriestrasse 30 Fax: +41 (0)71 644 77 00
CH-8583 Sulgen E-Mail: info@tool-temp.ch
Schweiz – Suisse – Switzerland Internet: www.tool-temp.ch

Tool-Temp TT-180 Specifications

General

Brand	Tool-Temp
Model	TT-180
Category	Control Unit
Language	English

Summary

3. Safety and Use as Agreed

4. Installation

4.1 Fluid Connections

4.2 Power Supply

Instructions for connecting to the power supply by a competent electrician.

4.3 Filling

Instructions for automatic and manual filling for water and oil operation.

4.4 Pump Rotation Check

6. Operations

6.1 Setting the Temperature

How to adjust the required temperature using the controller's buttons.

6.2 Change Over Heating Power

7. Safety Devices

7.2 Heating

Maximum temperature limit of +150°C for the electronic controller and mechanical thermostat.

8. Monitoring Devices

8.1 Level Control

Description of level control lamps, alarms, and auto-refill for water/oil.

8.2 Temperature Monitoring

Monitoring of maximum temperature, deviation control, and related alarms.

8.3 Fault Indication (Audible Alarm)

Explanation of audible alarms (horn) for low level, thermal relay, or safety thermostat activation.

9. Inspection and Maintenance (DIN 31051)

9.1 Inspection

9.2 Maintenance

Periodic checks and cleaning of the unit, including specific component maintenance intervals.

10. Failure Corrective Action

11. Control Panel

13. Temperature Controller MP-888

13.1 Programming MP-888: Control Units without Flow Control

15. Change-over Water; Oil Operation