Manual TT-180 - 3 -
3. Safety and use as agreed
The temperature control unit must not be used for other than the described purpose within the fixed
values for temperature and voltage for the temperature control of moulds. Any other use to which we
have not agreed to is strictly forbidden. The use of others than the prescribed heating mediums (water with
9 kW / heat transfer oil with 3 kW - see chapter 5) and/or the use of others than the admitted spare parts
can lead to dangerous operating states and is strictly forbidden. When the unit’s construction state is
changed the operating permission and the conformity declaration become invalid.
Important information in this manual is marked as follows:
remark:
helpful information
CAUTION!
RISKS WHICH CAN LEAD TO MATERIAL DAMAGE
DANGER!
RISKS WHICH CAN LEAD TO PERSONAL INJURY
The TT-180 is equipped with the following pictographs (according to DIN 4844) to mark the remaining
dangers (according to EN 1050) the following:
DANGER! VOLTAGE
DANGER! HOT SURFACE
To Next Page
Loading...
Need help?
General
