Manual of instructions TT-390 28/35
9. Out-of-service / transport
Cool the temperature control unit down, mould drainage, turn it off, press the main switch and
disconnect the power supply. Disconnect all hoses from the temperature control unit.
The temperature control unit is to be emptied before shipping. The danger of freezing (bursting of
pipes or other compontents) at low temperatures can be reduced. The unit must be transported or
stored in the operating position.
Drain the unit to avoid freezing damages!
Avoid compressed air, blowing out with compressed air can damage the
unit!
Never transport the unit lying – Lying transport will destroy the unit!
10. Disposal
The temperature control unit must be drained completely and disposed of in accordance with local
regulations.
The temperature control unit can also be returned to TOOL-TEMP for disposal.
To Next Page
Loading...