10
First steps
3.4 Handset
3.5 Wall mounting
You can fix the base station to the wall using 2 screws, 100 mm apart.
To hang the receiver on the base station, the insert (no. 32 in figure 3F
„Base station“ on page 12) must be turned 180° as shown.
Caution Risk of injury due to explosion!
Only use the supplied rechargeable batteries or
batteries of a similar type. Do not use ordinary
disposable batteries!
Otherwise the cordless handset may be damaged.
1 Open the battery compartment as shown in figure 3C.
2
Insert the rechargeable batteries. Make sure the polarity is
correct (+ and -).
3
Close the battery compartment.
4
Place the handset in the charger and charge it for 16 hours. The
charging LED is illuminated
To Next Page
Loading...
