Redialling one of the last 3 telephone numbers called
5.3 Incoming calls
When an incoming call is received, the handset and the base station
ring and the "Visual call signal" LED (see point 14 in figure 3E and
point 27 in figure 3F) flashes on the handset and base station.
5.4 Activating/deactivating hands free mode
You can use this function to answer a call without having to hold the
handset or if the a call is already being conducted on the handset.
During the call:
5.5 Mute
The microphone can be muted during a call so that you can talk without
being overheard by the person on the other end of the line.
1 Press the redial key.
The last number called appears in the display.
If you want to redial one of the last 3 numbers, keep
pressing the redial key until the number you want
appears in the display.
2
Press the call button.
The telephone number is automatically dialled.
3
Press the hang up key to end the call.
1 Press the answer call key to answer the call.
2
Press the hang up key to end the call.
1 Press the hands free key to activate the function.
2
Press the hands free key again to switch the call
back to the handset.
Important The batteries discharge more quickly if you use
hands free mode for a long time!
1 Press the mute key.
The microphone is muted and
"MUTED"
is
displayed.
2
Press the mute key again to reactivate the
microphone.
To Next Page
Loading...
