26
Using the cordless handset
5.6 Setting the earpiece/hands free volume
During a call:
5.7 The R key (Flash)
5.8 Selecting the ring tone and setting the volume
Handset ring tone for internal/external calls
Handset ring tone volume
1 Press the down key.
2
Press the up and down keys.
You can set the volume to levels 1 to 5.
Press the Flash key on the base station (key12 in
figure 3E „Cordless handset“ on page 11) to use
special services on your external line such as "call
waiting" (providing your telephone line provider offers
this service) or to forward a call when you are using a
PBX. The flash key R briefly interrupts your call. You
can set this interruption time to 100 ms or 300 ms. To
set a different flash time, see „4.19 The R key (Flash)“.
1 Press the Menu / OK key.
2
Select
"HANDSET"
and confirm.
3
Select
"RING TONE"
and confirm.
4
Select
"INTERNAL"
or
"EXTERNAL"
and confirm.
5
Now select a ring tone (1 to 9) and confirm.
1 Press the Menu / OK key.
2
Select
"HANDSET"
and confirm.
3
Select
"RING TONE"
and confirm.
4
Select
"VOLUME"
and confirm.
5
Select the required volume (Off, 1-5) and confirm.
Important You can switch the ring tone volume of any individual
handset ON or OFF by simply holding the ring tone
ON/OFF key in standby mode.
The symbol appears in the display and the key
lock is activated.
To Next Page
Loading...
