The default settings are:
5.15 Voicemail display
This display only works if you have enabled the voicemail or telephone
message service and your telephone service provider transmits this
information along with the caller ID! When you receive a new message
in your voicemail box, the symbol appears in the display. The
symbol disappears when you have listened to your message.
6 Registering and de-registering a handset
6.1 Registering a handset to the Sologic B901 base station
You can register to 5 handsets onto one base station. Every handset
is already registered to the base station on delivery.
You only need to register the handset if:
• the handset has previously been de-registered from this base
station (e. g. to reinitialise it)
• you want to register a different handset to the base station.
The following description only applies to Sologic B901 handsets and
base stations.
3
Select
"RESET"
and confirm.
4
Enter the PIN number of the base station (default
0000).
5
The device reverts to standby mode.
Handset name HANDSET
Earpiece volume Level 3
Ring tone volume Level 3
External ring tone Ring tone 8
Internal ring tone Ring tone 1
Keypad beep On
1 Hold down the paging key on the base station for
10 seconds.
"REGISTER" is now shown in the base station
display. This means that the base station is in
registration mode. The handset can now be
registered as follows:
To Next Page
Loading...
