Topcom SOLOGIC B935 - Changing Handset Name; Auto Answer; Handset Reset

16 Sologic B935
Sologic B935
• Press the up or down key / repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘LCD Contrast’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly to change the contrast between 0
(light) and 16 (dark).
•Press ‘Save’
to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.20 Changing the handset name
You can change the handset name displayed on the handset during standby.
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘HS Name’ is selected.
•Press ‘Select’ to confirm.
• Enter the new handset name and press ‘Erase’ to erase the characters in front of the
cursor.
•Press ‘Save’ to confirm your selection or press ‘Back’
to leave the menu without
saving.
7.21 Auto answer
When there is an incoming call and the handset is on the base, the phone automatically takes
the line when lifted. This function can be turned on or off.
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Auto Answer’ is selected.
•Press ‘Select’ to confirm.
•Select
–‘On’: turn on the auto answer
–‘Off’: turn off the auto answer
•Press ‘Save’ to confirm your selection or press ‘Back’
to leave the menu without
saving.
7.22 Turning visual ringer and shaker on/off
By turning on the visual ringer and shaker, the visual ring will blink and the handset will
vibrate during an incoming call.
• Press and hold the key until the icon appears to activate it.
• Press and hold the key until the icon disappears to deactivate it.
8 Handset reset
You can restore all handset settings back to default and erase all phonebook, call log, ring
volume/melodies, Audio setup, Tone setup, Alarm, language and redial entries. The LCD
contrast cannot be restored.
To restore the default settings:
15
7
15
7
15
7
13
5
15
7
15
7
13
5
15
7
15
7
13
5
1
9
9