Sologic B935 27
Sologic B935
ENGLISH
17 Technical characteristics
Standard: DECT(Digital Enhanced Cordless Telecommunications)
GAP ( Generic Access Profile )
Frequency range: 1880 MHz to 1900 MHz
Number of channels: 120 duplex channels
Modulation: GFSK
Speech coding: 32 kbit/s
Emission power: 10 mW ( average power per channel )
Range: 300 m in open space / 50 m maximum in-house
Base power supply: In: 230V AC / 50Hz - Out: 7,5V DC / 300mA
Handset Batteries: 3 rechargeable batteries AAA, NiMh 600mAh
Handset standby time: 100 hours in standby
Handset talk time: 10 hours
Charging time: 16 hours
Dialing mode Tone / Pulse
Normal conditions of use: +5 °C to +45 °C
Flash time: 100ms or 300ms
18 Topcom Warranty
18.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. There is no warranty on standard or rechargeable batteries (AA/
AAA type).
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original or copy of the purchase receipt,
on which the date of purchase and the unit-model are indicated.
18.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed
service center will repair any defects caused by material or manufacturing faults free of
charge, by either repairing or exchanging the faulty units or parts of the faulty units. In case
of replacement, colour and model can be different from the original purchased unit.
Tone is good, but
cannot make any
connection
The dialing mode is wrong Adjust the dialing mode (pulse/
tone)
Not possible to transfer
a call on PABX
The Flash Time is too short Change the Flash Time
Telephone does not
react to pressing the
keys
Manipulation error Remove the batteries for at
least 1 minute and put them
back in place
To Next Page
Loading...
