EasyManua.ls Logo

Topcom SOLOGIC B935 - Changing PIN Code; Base Reset

Topcom SOLOGIC B935
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sologic B935 21
Sologic B935
ENGLISH
Press the up or down key / repeatedly until BS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Flash Time’ is selected.
•PressSelect’ to confirm.
•Select
–‘Flash-1’: (short) to have a flash of 100ms
–‘Flash-2’: (long) to have a flash of 300ms
•PressSave to confirm your selection or press ‘Back
to leave the menu without
saving.
12.2 Changing the PIN code (system PIN code)
Certain functions are only available if you know the PIN code of the base.
The PIN code has 4 digits. The default PIN code setting is ‘0000’. If you would like to change
the PIN code and set your own secret code, do the following:
Press the left ‘Menu’ key.
Press the up or down key
/ repeatedly until ‘BS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Modify PIN’ is selected.
•PressSelect’ to confirm.
Enter the current pin and press ‘Next’.
Enter the new pin and press ‘Next’.
Enter the new pin again and press ‘Save to store the new pin or press ‘Back
to
leave the menu without saving.
12.3 Setting the dialing mode
There are two types of dialing modes that can be used on a telephone line:
DTMF/Tone dialing (the most common)
Pulse dialing (for older installations)
To change the dialing mode:
Press the left ‘Menu’ key.
Press the up or down key
/ repeatedly until ‘BS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Dial mode’ is selected.
•PressSelect’ to confirm.
Use the up or down key
/ to select ‘Tone’ or ‘Pulse’.
•PressSave
to confirm or press ‘Back to leave the menu without saving.
12.4 Base reset
You can restore all Base settings back to default.
To restore the default settings:
Press the left ‘Menu’ key.
Press the up or down key
/ repeatedly until ‘BS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘BS Reset’ is selected.
•PressSelect’ to confirm.
Enter the pin code (0000).
15
7
15
7
13
5
15
7
15
7
13
5
15
7
15
7
15
7
13
5
15
7
15
7

Related product manuals