183
24. ROUTE SURVEYING
• When curve properties are already
input, curve type cannot be changed.
First clear all route data.
"24.8.2 Inputting Curve Elements"
The automatic setting method can be selected from the following:
(*: Factory setting)
• BP Point of the next curve: "IP" (IP Point of the previous curve)*/"EC/KA2" (end-
point of the previous curve (KA-2 or EC Point)).
• Curve: Clothoid* / Parabola
Alignment/Setting
Next BP : IP
Existing curve
Curve : Clothoid
To Next Page
Loading...
