Need help?Do you have a question about the Topcon EZ2810 and is the answer not in the manual?
General| HELP MESSAGES | Context sensitive help messages in 10 languages, Long messages are scrolled |
|---|---|
| LOAD CELL EXCITATION | 8 volts D.C. Nominal, Capable of driving ten 350 Ohms transducers, Short circuit proof |
| LOAD CELL SIGNAL | Compatible with Load Cells with greater than 0.25 mv/v |
| GROSS RANGE | 999, 999 max. display |
| ZERO TRACKING | Selectable, On/Off |
| SPAN ACCURACY | ± (.1% + .005%/ °F) or (.1% + 0.009% °C) full scale ± 1 output count |
| MOTION DETECTION | Selectable, On/Off |
| ZERO ACCURACY | (.005%/ °F) or (0.009% °C) full scale ±1 output count for 0.5 mv/v transducer |
| WEIGH ALGORITHM | 3 internally selectable digital filters to optimize performance (General, Slow, and Fast) |
| HOLD MODE | Used in mobile applications to stabilize displayed weight while moving the scale |
| AUTO TEMPERATURE COMPENSATION | Of internal circuitry for high accuracy weighing measurements |
| SET UP AND CALIBRATION | Via front panel or USB (???) |
| ENVIRONMENTAL ENCLOSURE | IP65, IEC 529 |
| OPERATING TEMP | -29°C to 60°C -20°F to 140°F |
| CONNECTORS | AMP plastic weather resistant circular connector. Gold plated contacts. |
| 2 REMOTE INPUTS (Power/Remote ports) | Tare / Print / Hold / Net Gross / M+ / Zero / TR Hold / Re-enter Preset / Switch |
| REMOTE PORT Power Output | 2 x Large Display LED Remote Displays (RD4000) or 3 x Standard Display Remote Displays (RD2500V) |
| POWER REQUIREMENTS | 10.5 to 16.0 V.D.C. 160 mA nominal with four 350Ω L.C. |
| LOW BATTERY WARNING POUND/KILOGRAM | Enabled at 10.5V nominal Selectable |
| DISPLAY | 6 Digit Chip on Glass LCD 1.7” high |
| DISPLAY RESOLUTION | .01, .02, .05, .1, .2, .5, 1, 2, 5, 10, 20, 50, 100 |
| DISPLAY UPDATE RATE | Selectable: 1, 2, 3, 4 times/sec. |
| MAX. DISPLAY RESOLUTION | Adjustable to 40, 000 counts max. |
| NON-VOLATILE MEMORY | Standard |
Weight and Dimensions| SIZE | 10.25” long x 8.0” high x 4” wide (260mm x 190mm x 105mm) |
|---|---|
| WEIGHT | 4.5 lbs. (2.04 Kg) |
Overview of EZ2810 features, technical specifications, and accuracy guidelines.
Essential safety guidelines, cleaning, battery charging, and welding precautions.
Understanding the indicator layout, buttons, and performing basic operations.
Using Tare, Net/Gross modes, and memory options for weighing and record keeping.
Utilizing mixer timer, restart timer, and other advanced operational features.
Managing Hold mode to stabilize weight and setting/clearing preset values.
Controlling loading/unloading, net weight display, and preloading tare weights.
Configuring pre-alarm for early warnings and setting tolerance for weighing.
Using rotation counter for mixer monitoring and setting maintenance reminders.
Step-by-step guide to accessing and navigating through system menus.
Procedures for viewing and changing setup and calibration numbers.
Changing user settings like language, display rate, and other general options.
Configuring communication ports, baud rates, data transfer, and remote terminal settings.
Adjusting motion detection, weight display, presets, alarms, and timer settings.
Configuring system features like sign-on messages, maintenance, and communication ports.
Guidance on mounting the indicator and securely connecting its cables.
Connecting load cells, understanding direction, and troubleshooting load cell issues.
Details on optional accessories like cab controls, remote displays, printers, and sensors.
Diagnostic flowcharts for indicator, connection, and load cell problems.
Compliance certificates for the EZ2810 indicator.
To Next Page
