Topcon EZ2810 - 6.2.0 Load Cell Installation and Connections

D4008 – EN EZ 2810 Operators Manual 38
6.3.0 Connecting Load Cells to Junction Box
Connect load cell wires to terminal blocks. See Wire Color Key below.
6.4.0 Load Cell Direction
Observe direction of arrow when installing or replacing load cells.
Junction Box Illustrated
for 4 Load Cell
Installation
Tighten Nuts
Load Cell
Cable
Junction Box Cable
Connect to J902
Load Cell Port on
Indicator bottom
panel
Wire Color Key
Color
Description
1
White
Signal +
2
Green
Signal
-
3 Red Excitation +
4
Black
Excitation
-
5
Shield
Shield
Junction-Box Connection