D4008 – EN EZ 2810 Operators Manual 26
2.9.5 Maintenance Message
Message can be used to alert the user of maintenance needed to be done on the equipment.
Rotation Counter Sensor Kit required for this feature. For proper maintenance schedule, refer to
your OEM equipment’s operator’s manual.
1. Enter 8011 press . The user may
edit the maintenance message using
keypad.
2. “MANTMG 1” then edit maintenance
message using key pad. Key pad “1” does;
Example 1-A-B-C. Key pad “2” does; Example
2-D-E-F. When finished, press “ENTER”.
Example messages; “GREASE PTO SHAFT”.
Example; “CHANGE ENGINE OIL”.
There are 10 MANTMG windows to enter
user’s message. Six letters, spaces or
numbers fit in one maintenance message
window. The maintenance message scrolls as
one message.
To Next Page
Loading...
