Need help?Do you have a question about the Topcon GPT-3002W Series and is the answer not in the manual?
General| Model | GPT-3002W Series |
|---|---|
| Category | Measuring Instruments |
| Type | Total Station |
| Accuracy | 2" |
| Range with prism | 3, 000 m |
| Telescope Magnification | 30x |
| Working Temperature Range | -20°C to +50°C |
| Wireless Communication | Bluetooth |
| Distance Measurement Range | 3, 000 m |
| Distance Measurement Accuracy | ±(2mm + 2ppm) |
| Compensator | Dual-axis |
Provides essential guidelines for safe and proper handling of the instrument.
Explains important warning displays and icons for user safety.
Lists critical safety precautions to prevent hazards during instrument operation.
Details safety measures and classifications for laser beams used by the instrument.
Details the functions of the instrument's keys, including power and soft keys.
Explains the context-sensitive functions assigned to soft keys (F1-F4).
Describes how to access and use instrument options via the star key.
Step-by-step guide on leveling and centering the instrument on a tripod.
Procedure for turning on the instrument after leveling.
Explains how to interpret the battery power indicator and its implications.
Describes the tilt sensor functionality for angle correction.
Procedure for measuring horizontal and vertical angles to a target.
Covers setting and measuring angles using specific horizontal angle values.
Details the process for performing repeated angle measurements for accuracy.
Instructions for setting atmospheric correction values based on temperature and pressure.
Covers various offset measurement modes like angle, distance, plane, and column.
How to input the instrument's occupied point coordinates.
Accesses the data collection functions and menus.
Enables layout operations, setting points, and using coordinate data.
Provides access to internal memory management functions.
Procedure for measuring the elevation of a target without direct prism setup.
Calculates distances and bearings between two prisms automatically.
Configures settings like minimum reading and auto power off.
Manages automatic power-off settings to conserve battery.
Enables or disables tilt correction for vertical and horizontal angles.
Applies corrections for systematic errors in instrument measurements.
Detailed steps for performing data collection operations.
Using offset measurement modes within data collection.
Step-by-step instructions for performing layout operations.
Methods for searching recorded data files.
Operations for renaming, searching, and deleting files.
Managing data transfer between the instrument and a computer.
Resets the instrument's internal memory to its default state.
Information on removing, charging, and refreshing the on-board battery.
Procedure for verifying and setting instrument constants.
Checks the alignment of the optical axes for EDM and theodolite.
Detailed steps to verify EDM and theodolite optical axis alignment.
Ensures the laser pointer's optical axis is aligned with the telescope.
General guidance on checking and adjusting theodolite functions.
Corrects systematic errors related to instrument collimation and axis alignment.
To Next Page