Topcon GPT-3002W Series - Selecting Battery Type; Heater ON;OFF

6-21
6 SPECIAL MODE (Menu Mode)
6.4.5 Selecting Battery Type
On-board battery BT-32Q can be also available for GPT-3000W series. When you use BT-32Q (Ni-Cd)
battery, select [Ni-Cd] type of battery in this parameters 1 menu.
If you select wrong type of battery, the battery remaining display may work incorrectly.
BT-52QA : Ni-MH battery type, BT-32Q : Ni-Cd battery type.
6.4.6 Heater ON/OFF
The heater option for both display units can be turned OFF or ON.
Operating procedure Operation Display
1
After pressing the [MENU] key, press the [F4](P
↓
)
key twice to get the menu on page 3/3.
[MENU]
[F4]
[F4]
2
Press the [F1] key and press the [F4](P
↓
) key to
get the menu on page 2.
[F1]
[F4]
3
Press the [F2] key.
[F2]
4
Press the [F2] key to select Ni-Cd battery type.
Then press the [F4](ENTER) key.
[F2]
[F4]
Operating procedure Operation Display
1
After pressing the [MENU] key, press the [F4](P
↓
)
key twice to get the menu on page 2.
[MENU]
[F4]
[F4]
2
Press the [F1] key.
[F1]
3
Press the [F4] key.
[F4]
4
Press the [F3] key.
The data previously set is shown.
[F3]
5
Press the [F1](ON) key or [F2](OFF) key, and
press the [F4](ENTER) key.
[F1] or [F2]
[F4]
MENU 3/3
F1:PARAMETERS 1
F2:CONTRAST ADJ.
P
↓
PARAMETERS 1 2/3
F1:ERROR CORRECTION
F2:BATTERY TYPE
F3:HEATER P
↓
BATTERY TYPE
[F1:Ni-MH ]
F2:Ni-Cd
ENTER
MENU 3/3
F1:PARAMETERS 1
F2:CONTRAST ADJ.
P
↓
PARAMETERS 1 1/3
F1:MINIMUM READING
F2:AUTO POWER OFF
F3:TILT P
↓
PARAMETERS 1 2/3
F1:ERROR CORRECTION
F2:BATTERY TYPE
F3:HEATER P
↓
HEATER [OFF]
F1:ON
F2:OFF
ENTER