Topcon GPT-3002W Series - Data Communications; Sending Data

9-14
9 MEMORY MANAGER MODE
9.7 Data Communications
You can send a data file stored in the internal memory to a computer directly. Also, you can directly load
a coordinate data file and PCODE Library data to the internal memory from the computer.
9.7.1 Sending Data
Example: Sending a Measured data file
Operating procedure Operation Display
1
Press the [F3](MEMORY MGR.) key from the
menu 1/3.
[F3]
2
Press the [F4](P
↓
) key twice.
[F4]
[F4]
3
Press the [F1](DATA TRANSFER) key.
[F1]
4
Press the [F2](RS-232C) key.
[F2]
5
Press the [F4](ENT) key.
[F4]
6
Select data format by pressing [F1] or [F2] key.
GTS format: The conventional data
SSS format: Including PCODE data , ‘From‘ and
‘To‘ data for Point to Line.
Example: [F1] (GTS FORMAT)
[F1]
7
Press the [F1] (SEND DATA) key.
[F1]
8
Select the type of data to send by pressing [F1]-
[F3] key.
Example : [F1](MEAS. DATA)
[F1]
9
Press the [F1](INPUT) key and enter File Name
you want to send. Press the [F4](ENT) key. *1),2)
[F1]
Enter FN
[F4]
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
MEMORY MGR. 3/3
F1:DATA TRANSFER
F2:INITIALIZE
P
↓
SELECT COM
[F1:BLUETOOTH]
F2:RS-232C
ENTER
SELECT COM
F1:BLUETOOTH
[F2:RS-232C]
ENTER
DATA TRANSFER
F1:GTS FORMAT
F2:SSS FORMAT
DATA TRANSFER
F1:SEND DATA
F2:LOAD DATA
F3:COMM. PARAMETERS
SEND DATA
F1:MEAS. DATA
F2:COORD. DATA
F3:PCODE DATA
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
SEND MEAS. DATA
>OK ?
––– ––– [YES][NO]