7-20
7 DATA COLLECTION
7.6 Editing PCODE Library [PCODE INPUT]
PCODE data can be entered into PCODE Library in this mode.
A PCODE is liked with a number of 1 to 50.
PCODE can be also edited in MEMORY MANAGER menu 2/3 in the same way.
Operating procedure Operation Display
1
Press the [F2](PCODE INPUT) key from Data
Collect menu 2/2.
[F2]
2
By pressing the following keys, the list will increase
or decrease.
[ ] or[ ] : Increasing or Decreasing one by one
[ ]or[ ] : By ten Increasing or Decreasing.
[]or[]
[]or[]
3
Press the [F1](EDIT) key.
[F1]
4
Enter PCODE and press the [F4](ENT) key. *1)
Enter
PCODE
[F4]
*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
DATA COLLECT 2/2
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG. P
↓
→
001:TOPCON
002:TOKYO
EDIT ––– CLR –––
011:URAH
→
012:AMIDAT
013:HILLTO
EDIT ––– CLR –––
011:URAH
→
012=AMIDAT
013:HILLTO
1234 5678 90.– [ENT]
011:URAH
→
012:AMISUN
013:HILLTO
EDIT ––– CLR –––
To Next Page
Loading...
