1-6
1 NOMENCLATURE AND FUNCTIONS
Coordinate measurement mode
1
F1 MEAS Start measuring.
F2 MODE Sets a measuring mode, Fine/Coarse/Tracking.
F3 NP/P Switches non-prism mode or prism mode.
F4
P1
↓
The function of soft keys is shown on next page (P2).
2
F1 R.HT Sets a prism height by input values.
F2 INSHT Sets an instrument height by input values.
F3 OCC Sets an instrument coordinate point by input values.
F4
P2
↓
The function of soft keys is shown on next page (P3).
3
F1 OFSET Select Off-set measurement mode.
F2 m/f/i Switches meter, feet or feet and inch unit.
F3 S/A Select set audio mode.
F4
P3
↓
The function of soft keys is shown on next page (P1).
To Next Page
Loading...
