Topcon GPT-3002W Series - MEMORY MANAGER MODE

9-1
9 MEMORY MANAGER MODE
9 MEMORY MANAGER MODE
The following items for internal memory are available in this mode.
1) FILE STATUS : Checking the number of stored data / Remaining internal memory
capacity.
2) SEARCH : Searching the recorded data.
3) FILE MAINTAN. : Deleting files / Editing file name
4) COORD. INPUT : Inputting coordinate data into Coord. data file.
5) DELETE COORD. : Deleting coordinate data from Coord. data file.
6) PCODE INPUT : Inputting PCODE DATA into PCODE Library
7) DATA TRANSFER : Sending measured data or coordinate data or PCODE Library data /
Uploading coordinate data or PCODE Library data / Setting
communication parameters
8) INITIALIZE : Initializing internal memory.
● Memory manager menu operation
By pressing the [MENU] key, the instrument will be in MENU 1/3 mode.
Press the [F3](MEMORY MGR. ) key, the menu of MEMORY MGR. 1/3 will be shown.
Normal measurement mode
MENU 1/3
F1:DATA COLLECT
F2:LAYOUT
F3:MEMORY MGR. P
↓
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN.P
↓
[ESC]
[MENU]
MEMORY MGR. 2/3
F1:COORD. INPUT
F2:DELETE COORD
F3:PCODE INPUT P
↓
MEMORY MGR. 3/3
F1:DATA TRANSFER
F2:INITIALIZE
P
↓
[F3]
[F4]
[F4]
[F4]
MEMORY MGR. MENU 1/3
MEMORY MGR. MENU 2/3
MEMORY MGR. MENU 3/3