Topcon EZ2810 - 5.2.0 Communication and Data Features

D4008 – EN EZ 2810 Operators Manual 31
SETTING
[display]
D.A.N
NO.
OPTIONS [displayed]
BOLD=DEFAULT
DESCRIPTION
MENU 2
-
C
OMMUNICATIONS FEATURES
REMOTE
2001 ON/OFF If ON indicator communicates with Cab Control Display
SCALE NUMBER
2002
1,2,3,4,5,6,7,8,9,10,11,12,
13,14,15,16,17,18,19,20,
21,22,23,24
Select scale number for cab control communication
EXTERNAL
RADIO
2003 ON/OFF Enables external radio to be connected to the J905 port.
DDL ATTACHED
2004 YES/NO Enables connection of a DDL (Data DownLoader)
SCOREBOARD
MODE
2101
0,1,2,3,4,5,6,7,8,11,12,15,
27,37,38,39
Select scoreboard output
ZERO OUTPUT
2102 Allows zero/balance for SCOREM #11 serial gross weight.
FRONT PANEL
ZEROUT
2103 OFF/ON Allows use of the zero key to zero/balance the serial gross weight.
OPERATION
STATUS
2111 0, 2 Select operating data to be sent to a Remote Terminal
COM 1 BAUD
RATE
2201
1200,2400, 4800, 9600,
14400, 19200, 38400,
57600, 115200
Sets baud rate for com port #1
COM 1 PARITY
2202 NONE, ODD, EVEN
Sets parity for com port #1
COM 1 DATA
BITS
2203 7, 8
Sets data bits for com port #1
COM 1 DELAY
2204 0, .10, .25, .50, .75, 1-5 Selects seconds to delay before advancing to next line.
COM 2 BAUD
RATE
2211
1200,2400, 4800, 9600,
14400, 19200, 38400,
57600, 115200
Sets baud rate for com port #2
COM 2 PARITY
2212 NONE, ODD, EVEN Sets parity for com port #2
COM 2 DATA
BITS
2213 7, 8 Sets data bits for com port #2
COM 2 DELAY
2214 0, .10, .25, .50, .75, 1-5 Selects seconds to delay before advancing to next line.
TARE AUTO
PRINT
2301 ON/OFF If ON -tare auto-prints displayed weight.
ONE LINE PRINT
2302 ON/OFF
If ON -indicator data prints on one line.
AUTO PRINT
2303 ON/OFF If ON -pressing keys auto-prints weight values.