Topcon IS203 - Page 156

154
17 MESSAGE/ERROR DISPLAYS
• If error still persist after attempting to clear them, contact your local Topcon dealer or Topcon head
office.
Adjust Axis mode set Error
Close the program and restart the in-
strument.
If this error code is consistently dis-
played, repair is required.
Adjust Axis Read Error
Adjust Axis Set Error
Angle Turn Set Error
Adjust Axis range Error.(1)
Adjust Axis dist Error.(2)
Adjust Axis f/r diff Error.(3)
Adjust VAxis std div Error.(4)
Adjust HAxis std div Error.(5)
Bluetooth mode change error
(Trn mode)
Bluetooth mode change error
(Command mode)
Bluetooth local device name get error
Bluetooth pincode get error
Bluetooth pincode set error
Bluetooth security get error
Bluetooth security set error
There is no response from Bluetooth module
There is no response from SSWireless module