85
4 STANDARD MEASUREMENT MODE
[Example : Horizontal distance]
1
Press the [P1] key in the distance
measurement mode to get on page 2.
2
Press the [S.O] key .
The current setting value is displayed.
3
With the [HD] - [SD] keys, select a mode for
inputting the standard distance.
4
Enter the horizontal distance for stake out.
5
Press the [SET] key.
6
Press the [EXIT] key.
7
Collimate the Prism.
The difference between the measured distance
and the standard distance is displayed.
•
To return to normal distance measurement mode, reset the standard distance to “ 0 ”.
Stake out indicator
To Next Page
Loading...
Need help?
General
