123
20. CHANGING THE SETTINGS
Items set and options (*: Factory setting)
Temperature: Celsius*/Fahrenheit
Pressure: hPa*/mmHg/InchHg
Angle: Degree (DDD.MMSS)*/Gon/Mil
Distance: Meter*/Feet/Inch
Feet (only displayed when "Feet" or "Inch" selected above):
International*/US
Inch (Fraction of an inch)
“Fraction of an inch” is the unit used in the United States and expressed like the following
example.
• Even if “inch” is selected in this setting, all the data including the result of area calculation are
output in “feet” and all the distance values must be input in “feet”. In addition, when the “inch”
display exceeds the range, it is displayed in “feet”.
20.8 Units
To Next Page
Loading...
