Topcon RL-H1Sa - Page 27

25
3 When the sensor signals “on-grade”, secure its position.
4 Press the ENT key. The display will change to “POS 2”.
Note
• When the instrument has auto-leveled, the “POS 1” will stop flashing.
Ｘ
ｒｐｍ
１００
ＭＡＮＵ
×
ＰＯＷＥＲ
％
ＯＮ
ＥＮＴ
Move Level Sensor Up
or Down Until Beam is
Detected.
Ｘ
ｒｐｍ
１００
ＭＡＮＵ
×
ＰＯＷＥＲ
％
ＯＮ
ＥＮＴ
When Beam is
Detected, Fix Level
Sensor.
50m (160 feet)
50m (160 feet)
PRESS
ENTER