18
How to Remove/Install Head Protector
When the head protector post blocks the laser beam and interferes with operation, remove the head
protector from the instrument.
How to Remove
1
Press the lock button to release the lock.
2
Set the angle of the head protector to approximately 45°.
3
Pull the head protector in the direction of the arrow.
Post
Lock button
NOTE
When the head protector is installed, do not
hold by upper section of the head protector
when transporting. Doing so may cause head
protector to come off, with instrument falling off
and may be damaged.
To Next Page
Loading...
