16
ASSEMBLY PROCEDURE
(b) Connect the chinrest cable, main body cable and power cable to the power supply.
(c) Remove the cable clips from the bottom of the table, slip them over the chinrest and power
cables and re-attach them to the table.
(9) Installing the Chinrest Paper
* Remove the two pins from the chinrest.
* Place the pins through the holes in the chinrest paper. Remove the wrapping from the chin-
rest paper.
* Align the pins with the holes in the chinrest and secure the paper to the assembly.
(10) Spare Parts
* With the table model, an accessory drawer is provided to store the spare parts.
Cable clip
To Next Page
Loading...