Topens AT6131 User Manual

Single Swing Gate Opener
User’s Manual
Model:
TOPENS Website
www.topens.com
Email: support@topens.com
AT6131 / AT12131
AT6131S / AT12131S
VER 22a
C030616
★
Please read and follow all warnings, precautions and instructions before
installation and use.
★
Coming with UPS01 uninterrupted power supply, this series gate opener can be
powered by AC 100-240V electricity directly. It is allowed to use additional battery
(NOT incl.) and solar panel (optional) as BACK-UP or MAIN power source with
this UPS01.
★
Never connect the solar panel to the control board directly to charge the battery.
★
Periodic checks of the opener are required to ensure safe operation.
★
Save this manual.

Topens AT6131 Specifications

General

Protection Level	IP44
Type	Gate Opener
Motor Type	DC Motor
Control Method	Remote Control
Features	Soft Start/Stop
Operating Speed	0.2 m/s
Operating Temperature	-20°C to +50°C
Safety Feature	Photocells
Opening Speed	0.2 m/s
Closing Speed	0.2 m/s
Max Gate Weight	660 lbs (300 kg)
Max Gate Length	12 ft (3.66 m)
Remote Control Range	65 ft (20 m)

Summary

Safety Installation Information

Parts List

Technical Specifications & Features

Installation Overview

Preparation for Installation

Install the Opener on the Gate – for Pull to Open

Step-by-step guide for mounting the opener on a gate for pull-to-open configuration.

Install the Opener on the Gate – for Push to Open

Step-by-step guide for mounting the opener on a gate for push-to-open configuration.

Mounting of the Control Box

Connection of the Power Supply

Power Mode 1: AC Electricity as Power Source

Using AC mains power directly to operate the gate opener system.

Power Mode 2: AC and Battery for Charging

Power Mode 3: Battery as Source, Solar for Charging

Power Mode 4: AC and Solar for Charging

Connection of the Control Board

Actuator Connection

Wiring the gate opener actuator to the main control board terminals.

UPS-01 Power Supply Connection

Connecting the UPS-01 power supply to the control board and other components.

Battery and Solar Panel Connection

How to Program the Remote to the Opener

Wireless Keypad Programming

Adjusting the Limit Switch

Setting of the Control Board

DIP Switches Configuration

Configuring the control board using DIP switches for various functions.

Potentiometers Adjustment

Trouble Shooting

Opener Does Not Run, Power LED Off

Solutions for when the gate opener fails to power on or run.

Gate Moves Little, Reverses or Stops

Opener Does Not Run on Remote Press

Gate Opens but Does Not Close

Gate Opens Automatically, Does Not Auto-Close