Topper WOW RO 50 - Introduction to The WOW RO System; General Information

2
The WOW RO System operates by removing contaminants from water at the molecular level. By
using your household water pressure to squeeze your water against a special membrane, water
molecules are separated from impuries. Rejected dissolved solids are automacally rinsed down
the drain leaving only high-quality, delicious water for you to use.
1. The WOW RO System will replenish approximately 1.5 gallons (5.7 L) in 35–90 minutes, de-
pending on your incoming water pressure, quality, and temperature. This appliance is designed
with a self-regulang, atmospheric producon, and a ush feature that limits the reject water
to approximately 2 gallons (7.6 L) for every gallon (liter) of treated water. Your appliance will
perform beer and last longer with heavy use. We encourage you to water house plants, pro-
vide water for pets, cook, mix drinks, ll baeries, etc., with treated water. Cauon: The work-
ing capacity of this appliance depends on the pressure, temperature and TDS load of the wa-
ter supply. This appliance is not guaranteed to work properly with water pressure less than 20
psi (1.4 bar) and water temperature below 40°F (4°C), or above 100° (37.8C), and TDS over
1,400 ppm.
Introduction to The WOW RO System
General Information
2. The storage tank will store 1.5 gallons (5.7 L) of water.
3. The WOW RO System can be connected to a variety of appliances, including your automac ice
maker, cold water dispenser in the refrigerator door, coee maker, water cooler, and other
commercial applicaons.
4. The WOW RO System is designed to be connected to cold water only.
Cauon: Never run hot water through your appliance.
5. The ow of water through your treated water faucet will not be as strong as your sink faucet.
6. The WOW RO System is made of safe, non-toxic, health and environment-friendly materials.
BPA Free.
Warning: Do not allow your appliance to freeze.
Figure 1: Installation Diagram