Tormach 770M Installation Guide

2.1 INSTALLATION
Install the Right Front Panel
1. Attach the right front panel to the right chip pan with two M6 × 1.0 - 12 screws.
Figure 2-8: Right front panel attached to the right chip pan.
2. Attach the right front panel to the right side panel with seven M5 × 0.8 - 10 screws.
Figure 2-9: Right front panel attached to the right side panel.
Install the Left Top Panel
1. Attach the left top panel to the panels on the left side of the enclosure with 12 M5 × 0.8 - 10 screws.
Figure 2-10: Left top panel attached to the left side of the enclosure.
Page 8
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10536: Installation Guide: 770M Enclosure (0522A)

Tormach 770M Specifications

General

Brand	Tormach
Model	770M
Category	Power Tool
Language	English