To Next PageTo Next Page
Need help?Do you have a question about the Tormax iMotion 1301 and is the answer not in the manual?
Identifies the intended users of the automatic swing door system.
Instructions for storing and transferring the user manual.
Specifies the types of automatic swing doors and drives covered by the manual.
Explains the meaning of various symbols used in the manual for safety and operation.
Provides detailed technical specifications for the TORMAX automatic swing door drives.
Defines the roles and responsibilities for installation, operation, and maintenance.
Outlines the correct and intended applications for the automatic swing door system.
Details prohibited uses and modifications of the automatic swing door system.
Specifies requirements before operating the automatic swing door system.
Identifies potential dangers such as crushing, shearing, and collision with moving door parts.
Refers to the necessity of performing regular checks as per chapter 7.
Procedure for taking the system out of service safely during a fault.
Guidelines for the proper dismantling and disposal of the system at its end of life.
Explains automatic opening and closing triggered by sensors.
Details safety measures for protecting the door leaves from damage or injury.
Describes operation in full-energy mode, including safety mode activation.
Explains operation in low-energy mode, focusing on speed and force reduction.
Details how to operate the door by manually pushing it to initiate automatic movement.
Explains how to manage door movement for different traffic conditions and user types.
Describes the system's self-monitoring capabilities for safety sensors and internal tests.
Explains how the system can be locked in a closed position using an electric lock.
Details functions and operations during power outages, including battery backup.
Covers various operating modes like OFF, AUTOMATIC 1, AUTOMATIC 2, EXIT, OPEN, and Manual Operation.
Steps for initial setup and power-on of the automatic swing door system.
Guide to using the user interface for selecting modes and unlocking the unit.
Explains fault codes displayed on the user interface and how to reset them.
Procedure for restarting the control system and its calibration run.
Details how to select operating modes using a physical switch.
Explains how to operate the door during a power failure using a key switch and battery.
Procedure for resetting the panic fitting after manual operation or during a fault.
How to interpret fault displays and perform resets via the user interface.
Method for resetting faults using the operating mode switch.
Procedure for resetting faults by cutting off and restoring power.
Instructions for cleaning the casing parts, user interface, and door leaves.
Details on performing regular checks of the door system's function and safety devices.
Procedures and intervals for specialist maintenance and testing of the system.
A comprehensive table listing system behaviors, causes, and remedies for faults.
General| Brand | Tormax |
|---|---|
| Model | iMotion 1301 |
| Category | Door Opening System |
| Language | English |
