Tormax iMotion 2301 - User Manual

Brokelandsheia, 4993 Sundebru, Tlf + 47 37119950 Fax + 47 37119951
E-mail: post@picomed.no Foretaksnummer 962 211 631 MVA
Omgivelseskontroll
Dokumentasjon for Dørautomatikk
Picomatic 2202
Picomatic 2301
Picomatic 2302
Picomatic 2401
(Tormax 2202, 2301, 2302 og 2401 for
omgivelseskontroll)

Summary

Safety

Responsibilities, Intended Use, and Pre-conditions

Hazards, Risks, and Checks

Identifies hazards, risks, and outlines regular system checks.

Product Description

Operating Modes Explained

Details the various operating modes and their applications.

Operation

Commissioning and User Interface Operation

Steps for initial setup and using the TORMAX user interface.

Mode Switch and Power Failure Operations

Procedure in the Event of a Fault

Fault Identification and Reset Methods

Explains fault indications and various methods for resetting the system.

Appendix

Fault Diagnosis and Functional Checklists

Contains a fault table and a checklist for functional checks.

Installation on Site

Component and Sliding Leaf Installation

Mechanical Adjustments

Leaf Alignment, Roller Adjustment, Grounding, and Lock Clearance

System Checking and Pre-Handover

Final Checks Before System Handover

Tormax iMotion 2301 Specifications

General

Type	Sliding Door Operator
Control System	Microprocessor-controlled
Operating Temperature	-20°C to +50°C
Protection Class	IP 20
Max Current Consumption	1.5 A
Power Supply	100-240 V AC, 50/60 Hz
Opening Speed	Adjustable up to 0.7 m/s
Safety Features	Obstacle detection
Hold-Open Time	Adjustable
Power Consumption	150 W
Closing Speed	Adjustable up to 0.7 m/s