To Next PageTo Next Page
Need help?Do you have a question about the Tormax iMotion 1301.S and is the answer not in the manual?
Outlines the roles and responsibilities of personnel involved in installation and operation.
Specifies the correct application and environment for the automatic swing door system.
Details improper uses and modifications that are not permitted for the door system.
Lists essential conditions and requirements before operating the automatic door system.
Highlights potential dangers such as crushing, shearing, and collision with moving parts.
Describes how the door automatically opens and closes based on sensor detection.
Explains how the door functions when main power supply is interrupted.
Describes various operating modes like OFF, AUTOMATIC 1, AUTOMATIC 2, EXIT, OPEN, and Manual.
Procedures for setting up the system before its first use after installation.
A comprehensive table listing system behaviors, their causes, and recommended remedies.
General| Type | Sliding Door Operator |
|---|---|
| Power Supply | 230 V AC, 50/60 Hz |
| Protection Class | IP 20 |
| Operating Temperature | -15°C to +50°C |
| Opening Speed | Up to 0.7 m/s |
| Closing Speed | 0.15 - 0.5 m/s (adjustable) |
| Hold-Open Time | 0 - 60 seconds |
| Control System | Microprocessor control |
| Safety Features | Obstacle detection |
| Max Door Weight (Single Leaf) | 130 kg |
