Tormax iMotion 2202.A

Need help?

Do you have a question about the Tormax iMotion 2202.A and is the answer not in the manual?

Summary

General Information

Target Groups

Identification of intended users for the automatic door system.

Manual Handling and Storage

Guidelines for keeping and transferring the operating manual.

Area of Application

Defines the intended use and scope of the automatic sliding door system.

Explanation of Symbols

Interpretation of safety and warning symbols used in the manual.

Technical Data

Specifies technical parameters, specifications, and ratings of the door system.

Safety Procedures

Responsibilities and Intended Use

Outlines duties, intended use, and pre-conditions for safe operation.

Hazards and Risks

Identifies potential dangers like crushing, entanglement, and collision.

System Checks and Service

Mandates regular inspections and procedures for safe deactivation during faults.

Disposal Guidelines

Instructions for environmentally sound dismantling and disposal of the system.

Product Description and Function

System Overview

Provides a visual and component-based breakdown of the automatic door system.

System Functionality

Explains automatic operation, traffic control, monitoring, and locking mechanisms.

Operating Modes

Details various operational states like OFF, AUTOMATIC, EXIT, OPEN, and Manual.

Operation and Fault Handling

Commissioning and User Interface Operation

Guides initial setup and use of the TORMAX interface for control.

Mode Switch and Power Failure Operation

Explains using the mode switch and manual actions during power outages.

Procedure in Event of a Fault

Guides on fault displays, resets via interface/switch, and power cycling.

Maintenance and Checks

Cleaning Procedures

Instructions for safely cleaning the door system components.

Functional Checks and Testing

Regular checks, maintenance, and testing for system reliability and safety.

Appendix and Troubleshooting

Fault Table

Comprehensive list of system behaviors, causes, and remedies for faults.

Functional Checks Checklist

Detailed checklist for verifying sensors, parts, guides, cladding, and controls.

Installation on Site

Installation Variants and Hints

Overview of different configurations and practical advice for correct installation.

Header Profile and Component Installation

Steps for mounting the header profile and fitting drive system components.

Sliding Leaves Installation

Procedures for mounting the movable door panels onto the system.

Mechanical Adjustments

Sliding Leaves Alignment

Steps to ensure door leaves are correctly positioned and parallel.

Roller, Grounding, and Lock Adjustments

Procedures for adjusting counter rollers, checking grounding, and setting lock clearance.

Cladding Installation

Instructions for installing the protective cladding panels for the drive system.

System Checking

Final System Verification

Final checks and verification before handing over the installed system.