Need help?Do you have a question about the Tormax 1102 and is the answer not in the manual?
Identifies intended users of the automatic swing door system.
Instructions for storing and passing on the user manual.
Defines the intended use of the door drive and warns against misuse.
Lists technical specifications such as drive type, power, weight, and temperature.
Outlines responsibilities for operation, maintenance, and testing of the system.
Specifies the intended use and warns against improper applications.
Lists prerequisites for safe operation, including reading manual and ensuring working order.
Details potential hazards like crushing, shearing, and collision from moving door parts.
Provides procedures for safely taking the system out of service during a fault.
Diagrams illustrating components of single and double-leaved systems.
Explains how doors open automatically using sensors based on approaching persons.
Discusses safety devices installed on door leaves for user protection.
Describes operation in full-energy mode and safety features.
Explains low-energy mode, its safety benefits, and speed/force restrictions.
Details operation where manual pushing initiates automatic opening and closing.
Describes manual opening with assistance, hold-open position, and closing.
Allows movement in one direction or complete blocking of the door.
Explains how the control system monitors sensors and internal tests for safety.
Describes the power-saving mode where illumination and sensors switch off.
Details the function of an electric lock to secure the door in the closed position.
Lists functions like controlled closing, opening via battery, or key switch during power outages.
Door is locked and sensors are disregarded; manual access is restricted.
Normal daytime operation where sensors open the door automatically.
Manual push initiates automatic opening, hold-open, and closing.
How the electric lock interacts with opening impulses and "Push-and-Go".
Used before closing hours, opens automatically via internal sensor.
Door remains open until next impulse or mode change.
Allows free movement of the door leaf for cleaning or shutdown.
Explains how a switch controls the secondary leaf's operation.
Steps to take before switching on the mains power supply for initial operation.
How to use the user interface to select modes and display status.
Procedures for unlocking the operating unit via lock or code.
How to select operating modes using selector keys on the interface.
How to access customer parameters using an access level code.
Step-by-step guide to entering the parameter code.
How the operating mode switch determines the system's mode.
How to open the door using a key switch and battery during power failure.
How to interpret fault displays on the user interface and reset them.
How to reset faults by changing the operating mode.
Procedure for resetting faults by temporarily disconnecting power.
Instructions for cleaning the door system components safely.
Requirements for regular checks to detect faults and ensure safety.
Guidelines for maintenance and testing by trained personnel, including intervals.
Lists system behaviors, causes, and remedies for various faults.
A checklist with procedures and expected results for performing functional checks.
General| Brand | Tormax |
|---|---|
| Model | 1102 |
| Category | Door Opening System |
| Language | English |
To Next Page
