Tormax iMotion 2202 - User Manual

Brokelandsheia, 4993 Sundebru, Tlf + 47 37119950 Fax + 47 37119951
E-mail: post@picomed.no Foretaksnummer 962 211 631 MVA
Omgivelseskontroll
Dokumentasjon for Dørautomatikk
Picomatic 2202
Picomatic 2301
Picomatic 2302
Picomatic 2401
(Tormax 2202, 2301, 2302 og 2401 for
omgivelseskontroll)

Summary

General Information

Explanation of the Symbols

Explains warning symbols and text highlighting.

Safety

Responsibilities

Outlines who is responsible for operation and maintenance.

Hazards and Risks

Identifies potential dangers like crushing, entanglement, collision.

Taking the System out of Service in the Event of a Fault

Procedures for safely taking the system out of service due to faults.

Product Description

System Overview

System Function

Explains the operational principles and functions of the door system.

Operating Modes

Details the different operational modes for the automatic door.

Operation

Commissioning

Steps for initial setup and activation of the automatic door.

Operation with the TORMAX User Interface

Operation with an Operating Mode Switch

Operation on Power Failure

Procedures for manual locking and unlocking during power outages.

Procedure in the Event of a Fault

Fault Display and Reset Using the TORMAX User Interface

How to interpret and reset faults via the user interface.

Reset of the Fault with the Operating Mode Switch

Reset of the Fault by Disconnecting the Power Supply

Appendix

Fault Table

A table detailing system behaviors, causes, and remedies for faults.

Check-list for Functional Checks

Installation

Installation Variants

Installation Hints

Installation of Header Profile

Installation of Components

Installation of the Sliding Leaves

Mechanical Adjustments

Aligning the Sliding Leaves

Steps for aligning door leaves for proper movement and fit.

Adjusting the Counter Rollers

Checking the Grounding

Adjusting the Lock Clearance

Checking the System

Tormax iMotion 2202 Specifications

General

Power Supply	230 V AC, 50/60 Hz
Protection Class	IP 20
Max. Current Consumption	1.5 A
Operating Temperature	-15°C to +50°C
Type	Automatic sliding door operator
Max Door Weight (single leaf)	200 kg
Opening Speed	Adjustable, up to 700 mm/s
Closing Speed	10-50 cm/s
Hold-open Time	0-60 s
Control System	Microprocessor-controlled
Safety Features	Obstacle detection