Tornado 99772

Questions and Answers:

C
Christy MartinAug 2, 2025
Why is the squeegee on my Tornado 99772 not drying perfectly?
- B
  Benjamin FloresAug 2, 2025
  If the squeegee on your Tornado Scrubber isn't drying perfectly, first ensure the suction function is activated and the recovery tank isn't full. Then, check that the squeegee rubbers are clean. Verify the height and inclination of the squeegee are properly adjusted. Also, make sure the suction and squeegee hoses are correctly inserted in their seats on the recovery tank. Clean the suction filter and the squeegee hose. Finally, inspect the rubbers for wear and turn or replace them if needed.
C
Craig HayesAug 9, 2025
How to troubleshoot vacuum motor not working on Tornado 99772?
- A
  April MillerAug 9, 2025
  If the vacuum motor on your Tornado Scrubber isn't working, start by verifying that the key switch is turned clockwise to switch on the machine. If alarm signals are displayed, switch the machine off and on again to restore functionality. Check the battery charge level on the display. Ensure you've correctly activated the drying function. Also, check that the recovery tank isn't full. If the signal lamp is on in both manual and auto modes, but the suction system still doesn't work, contact authorized technical assistance.
J
Joann VargasAug 14, 2025
What to do if water does not come down onto the brushes or is insufficient in Tornado 99772 Scrubber?
- R
  Robert MackAug 14, 2025
  If the water isn't coming down onto the brushes of your Tornado Scrubber or is insufficient, first verify that the key switch is turned clockwise to switch on the machine. Then, check the battery charge level on the display. Make sure you've correctly activated the washing function with the brushes. Confirm that the solution valve is open. If the signal lamp is on in both manual and auto modes but the detergent solution doesn't come down, check the liquid level in the tank. Also, check that the solution filter and the inner filter of the solution tank are clean. If the problem persists, contact authorized technical assistance.
B
boyermargaretAug 21, 2025
Why is the traction motor not working on my Tornado Scrubber?
- J
  jameshowellAug 21, 2025
  If the traction motor on your Tornado Scrubber isn't working, first, sit on the seat. Then, verify that the key switch is positioned clockwise to switch on the machine and that the battery is charged. Next, press the accelerator pedal on the right side to start the machine. If the problem continues, contact authorized technical assistance.
J
Juan VelasquezAug 27, 2025
What to do if brushes motor does not work in Tornado Scrubber?
- M
  Matthew JarvisAug 27, 2025
  If the brushes motor on your Tornado Scrubber isn't working, first verify that the key switch is turned clockwise to switch on the machine. If alarm signals are displayed, switch the machine off and on again to restore functionality. Next, check the battery charge level on the display. Ensure you've correctly activated the washing function with the brushes. If the issue persists, it's best to contact authorized technical assistance for advice.

Tornado 99772 Specifications

General

Brand	Tornado
Model	99772
Category	Scrubber
Language	English

Summary

Long Term Buyer Protection Limited Warranty

Warranty Terms and Conditions

Details limited warranty coverage periods for components and terms of service.

Grounding Instructions

Safe Grounding Procedures

Explains the importance of grounding and how to properly connect the appliance to an outlet.

General Rules of Security

Safety Precautions and Warnings

Outlines essential safety guidelines for operating and maintaining the machine to prevent hazards.

Key Symbols and Indicators

Explains the meaning of various symbols and indicators used on the machine's control panel and body.

Optional Accessories and Handling

Accessory Installation and Machine Handling

Covers the installation of optional accessories and procedures for handling the packed machine.

Battery Compartment Access

Describes how to access the machine's battery compartment for maintenance or replacement.

Battery Management

Battery Installation and Recharging

Details the steps for correctly installing and recharging the machine's batteries.

Battery Recharger Information

Information on selecting the correct battery recharger and using the incorporated charger.

Battery Charge Level Indicator

How to read and interpret the battery charge level indicator on the display.

Battery Check Card Settings

Procedures for setting the battery check card for different battery types.

Battery Disposal Guidelines

Proper procedures for disposing of used batteries as hazardous waste.

Machine Operation Basics

Hour Meter and Squeegee Adjustment

How to use the hour meter and adjust the squeegee for optimal drying performance.

Splash Guard Assembly

Instructions for attaching splash guards to the brushes base group.

Starting and Moving the Machine

Machine Startup Procedure

Step-by-step guide to safely start the machine and select operating modes.

Movement and Speed Control

How to control the machine's movement, speed, and direction selection.

Machine Control Modes

Automatic and Manual Operation Modes

Explains the automatic and manual modes for simplified or specialized operation.

Braking Systems

Information on the working brake and parking brake systems for stopping and securing the machine.

Automatic Squeegee Lifting

How the squeegee automatically lifts when the machine moves backward.

Specialized Washing and Drying

Washing or Drying Only Operations

How to perform washing or drying functions separately from the standard combined operation.

Brush Pressure and Detergent Flow Adjustments

Procedures for adjusting brush pressure and the flow rate of the detergent solution.

Electric Protection System

Details on the machine's electronic protection system against component defects.

Daily Maintenance Procedures

Recovery Tank and Suction Filter Cleaning

Steps for emptying and cleaning the recovery tank and its suction filter.

Brush Cleaning and Disassembly

Instructions for cleaning and disassembling the machine's brushes.

Machine Shutdown Procedure

How to properly stop the machine after completing cleaning operations.

Periodic Maintenance Checks

Squeegee and Hose Maintenance

Cleaning and checking squeegee rubbers and hoses for optimal performance.

Solution Tank and Filter Cleaning

Procedures for cleaning the detergent solution tank and its outer filter.

Squeegee Rubber Wear Check

How to inspect squeegee rubbers for wear and perform replacements.

Troubleshooting Guide

Motor and Water Flow Problems

Diagnoses and solutions for problems with motors and detergent water delivery.

Cleaning Performance and Foam Issues

Addresses problems related to the machine not cleaning properly or the squeegee not drying effectively.

Excessive Foam Production

Guidance on managing excessive foam during operation, including detergent use.

Programmed Maintenance Schedule

Recommended Brushes and Pads

Guidance on selecting the appropriate brushes and pads based on floor type and cleaning needs.

Related product manuals

Tornado Floorkeeper 99328

28 pages

Tornado Floorkeeper 20 PD/99120B

32 pages

Tornado Floorkeeper 28 TD/99128D